SANSI is committed to customize solutions for your unique application from designing to manufacturing and installation. No matter what your project requires, we are here to provide you with a custom solution that fits your needs.
Sansi is a leader in LED innovation and is dedicated to providing the ultimate lighting experience. In accordance with The American Medical Association (AMA), Sansi is committed to minimizing health and environmental risks. As recommended by the AMA, we can manufacture any colored temperature street light between 2000K-6500K to best suit your project. Using LED Ceramic technology, we’re able to extend the lifetime of our streetlights vs. LEDs using aluminum.
Ceramic LEDs vs. Aluminum LEDs
Using aluminum, the LED chip(s) must be molded to a PC board with a thermal adhesive. The PC board and thermal adhesive are necessary as aluminum is conducive to electricity. More pieces mean more heat as aluminum dissipates heat less efficiently vs. ceramic. LED chip(s) for Sansi LED Street Lights are both PC board and thermal adhesive free. The optic lens is secured to the ceramic that houses the LED chip(s).
The Ceramic LED Advantage
Sansi’s advantage with street lights is our ceramic technology. Ceramic dissipates heat more efficiently than aluminum and it’s not conducive to electricity allowing our LED chips to be molded directly to the ceramic. Fewer pieces mean less heat. Ceramic is more corrosive resistance vs. aluminum to better deal with moisture and air pollution. Sansi LED Ceramic Street Lights are suited for outdoor environments with protection levels as high as IP66.
Ceramic LED Technology
Our Independent Pixel Heat Sink Technology provides both even and fast heat dissipation for each LED light pixel.
Optics with the Light Flux Ray Method (LFR)
Using reversed optical designs and software, we simulate the optical parameters of the coverage area to calculate the lens model. Optical technology ensures that 93% of the light emitted is contained within the customized beam angle. Sansi optic lenses prevent optical loss and uniformed light distribution.
Modular Design-Wire Free, Plug-In Module Connections
There is no wire connection between the module unit and the light body making it convenient and easy for assembly and maintenance.
Light Distribution Customization
Sansi offers a variety of optical lens suitable for various road conditions providing uniformed light distribution
Our lights are easy to control and operate. 2.4 GH Intelligent Control System or PLC Control System using a standard ANSI C136.41 Interface Base with secondary energy savings with a power supply driver/dimmer interface with PWM, 0 ~ 10v.
The Angle Regulator is optional according to your environmental requirements. The Spirit Level is required to make sure the lights are mounted to a flat surface. The Anti-Dropping Device is required to prevent injuries or harm in inclement weather.
Simulation results of Motor Way
Simulation results of Motor Way
Simulation Results of Motor Way
Street Lighting Standards
Each country has its own set of requirements for street lighting applications. In the following ,summaries and examples of the standards in the various countries are presented.
European (German) standard
DIN EN 13201-2 Road lighting-Part 2: Performance requirements
ANSI/IESNA RP-8-2000 American National Standard Practice Roadway Light